-
长沙凯晶电子器材不多企业
地址:珠海市吉大工业区景园路5号5楼
邮编:519000
电话:0756-8606075
邮箱:tongxiao@slogansforagents.com
- Copyright © 2021 slogansforagents.com All Rights Reserved
- 技术支持:
为什么晶振会失效,是什么原因导致的? |
2022-03-02 |
晶振主要由石英晶片、银膜层电极、引线、支架和外壳等组成,是用电损耗很小的石英晶体经精密切割磨削并镀上电极焊上引线做成。这种晶体有一个很重要的机电效应特性,切割方向等密切相关。 晶振的好坏直接关系整个系统的稳定性,故如何选择一颗晶振,怎么看晶振的主要参数,是工程师的必修课,参数的选择关系到系统的稳定运行,具体选择不仅仅需要对晶振参数的详细把控(晶振的基本性能),也要不同参照不同系统的要求。选择不适当时可能会导致晶振不起振。今天来为大家分析晶振为什么会失效。 一、选型阶段:物料参数选型错误导致晶振不起振 1、等效负载需要8PF而选择了12PF 2、频率误差(ppm)太大,导致实际频率偏移标称频率从而引起晶振不起振 3、负性电阻值过大或太浅会产生晶振没有振(调整外接电阻,如下图中C1C2,通常情况下认为,负性电阻值值应够满足不不超晶振标称最大化电阻值3-5倍。负性电阻值过大,行将晶振外接电阻Cd和Cg的值调大来变低负性电阻值)
4、激励电平过大或者过小导致晶振不起振;通过调整电路中的Rd的大小来调节振荡电路对晶振输出的激励电平。一般而言,激励电平越小越好,处理功耗低之外,还跟振荡电路的稳定性和晶振的使用寿命有关。
2、晶振内部水晶片上附有杂质或者尘埃等导致晶振不起振
1、焊接时温度过高或时间过长,导致晶振内部电性能指标出现异常而引起晶振不起振 |